Control System of Sliding Robot-Bus Type

Release time：2022-04-25 10:28:21Source：匿名

Main uses, characteristics and control advantages of power regulator 1. Inductive load: the controller can run with transformer, and use slow start and slow turn-off to gradually paramagnetic and slow turn-off to gradually attenuate magnetic field; variable pulse width triggering technology can provide enough lock-in time to reach thyristor engine current, so as to avoid the unreliable triggering of narrow pulse. High reliability single chip computer hardware system and proprietary software design scheme enable the machine to work stably for a long time without current shock in various industrial complex power grid environments. Power regulator can be widely used in industrial low voltage and high current electric heating equipment, such as the electric heating of silicon carbon rods, silicon molybdenum wires and other electrical components in metallurgy, building materials, chemical industry, textile industry, as well as the electric melting of molybdenum and graphite electrodes in the heating medium and the reactor in chemical industry. 2. Resistive load: 1) Thermal inertia is smaller: slow start for 1 minute or longer, avoiding the negative resistance impulse current near 700 C. Stepwise paramagnetism and slow turn-off gradually attenuate magnetic field. Variable pulse width triggering technology can provide enough locking time to reach thyristor engine standing current to avoid unreliable narrow pulse triggering. (Including resistance furnace, heater, oven, baking channel, infrared radiation heating lamp tube, etc.) temperature self/manual control (heating, constant temperature, self-control temperature) and applied to voltage regulation, dimming, AC/DC motor speed regulation, electroplating, battery charging and other equipment, especially suitable for electric heating system with less thermal inertia 2) The larger category of thermal inertia: silicon-molybdenum, molybdenum wire, tungsten, platinum cold. Thermal resistance varies greatly, but the relationship between resistance and temperature is linear. Using step-down transformer and XCT1 current limitation, current limitation in low, medium and high temperature regions can be designed. In addition, SR53 linear limit can be used, and the output power can increase linearly with the set value of the instrument itself.
Integrative technology of voltage regulation and power regulation: Voltage regulation mode has small impact of load current and is suitable for transformer operation, but it inevitably brings power pollution and reduces power factor. Zero-crossing power regulation mode can not limit the current, cold shock will affect the life of the heating tube. Pulse transformer output, Self-distinguishing phase, phase-locked loop synchronous circuit with high ability to suppress cross-interference of power supply, with three warning tips of over-current, over-heat and under-voltage, rated current 20-500A. Intelligent AC power controller can be widely used in voltage regulation, constant voltage and current, constant power regulation in various fields of industry. It is suitable for resistive load, inductance load, soft start operation of transformer and motor, etc.